Liquid Electrical Tape - White - 4 oz
Creates an airtight, waterproof, and UV-resistant seal on electrical connections and wires. Designed for bilge pumps, outdoor wiring, marine applications, and small electronics repairs. The flexible coating withstands temperatures from -50°F to +275°F and provides superior dielectric protection.
Directions:
Wires or terminals to be sealed must be clean and dry. Squeeze Star brite® Liquid Electrical Tape onto the electrical connection area. Allow to dry for 5 minutes and apply a second coat if a greater thickness of seal is needed. Additional coats may be applied at 5-minute intervals to build up extremely thick protection. The product fully cures in 24 hours.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Descriptive, typographic, or photographic errors are subject to corrections. Copyright Tactical Wholesalers. All Rights Reserved.
